A New Wavelet Method for Identification of Eddies and Assessment of Incidents on Islands of the Eastern Caribbean

Using two dimensional continuous wavelet transforms, a novel method for identification of mesoscale eddies is presented to facilitate extraction of characteristics for area, amplitude, type, and location from maps of sea level anomalies. In comparison with the previously established growing method for eddy identification, it is found that the wavelet method identifies more than twice the number of eddies and is particularly better at resolving small eddies down to the 0.25 degree resolution of the data. Such research into eddy identification and tracking is significant to the assessment of eddies with potential to impact on coastlines of small islands. The method is applied to the identification of eddies on tracks towards islands of the Eastern Caribbean over 23?years. Spatial and temporal variation in rate of occurrence and magnitude is established. For Barbados there is an average of 9 anticyclonic incidents a year with maximum amplitude of typically 0.22?m in the dry seasons and 0.16?m in the wet seasons. Seasonal variation is reversed for the other islands with twice the number of anticyclonic incidents having maximum amplitudes of about 0.20?m annually.     

复杂地形景区三维导览图的设计与实现

为满足复杂地形景区对三维地图导览的需求,构建更为清晰的三维地图模型,提供良好的三维导览地图设计方案显得尤为重要。为了更好地与卫星影像进行贴合,DEM数据的采样密度要与卫星影像的分辨率一致。本文通过对比当下常用的四种空间插值方法的适用范围与运用特点,设置相关阈值及权重,直观比较了四种插值方法产生的插值结果,选择更适合复杂景区DEM插值的插值方法并对其进行精度提升,以此得到符合精度要求的DEM数据。最后利用相应地区的卫星影像进行地图投影及影像贴图,两种数据结合构建复杂景区的三维地图模型,给游客带来更为精确直观的定位信息和空间要素信息。     

Fully coupled elastoplastic hydro-mechanical analysis of unsaturated porous media using a meshfree method

This paper presents the first application of an advanced meshfree method, ie, the edge-based smoothed point interpolation method (ESPIM), in simulation of the coupled hydro-mechanical behaviour of unsaturated porous media. In the proposed technique, the problem domain is spatially discretised using a triangular background mesh, and the polynomial point interpolation method combined with a simple node selection scheme is adopted for creating nodal shape functions. Smoothing domains are formed on top of the background mesh, and a constant smoothed strain, created by applying the smoothing operation over the smoothing domains, is assigned to each smoothing domain. The deformation and flow models are developed based on the equilibrium equation of the mixture, and linear momentum and mass balance equations of the fluid phases, respectively. The effective stress approach is followed to account for the coupling between the flow and deformation models. Further coupling among the phases is captured through a hysteretic soil water retention model that evolves with changes in void ratio. An advanced elastoplastic constitutive model within the context of the bounding surface plasticity theory is employed for predicting the nonlinear behaviour of soil skeleton. Time discretisation is performed by adopting a three-point discretisation method with growing time steps to avoid temporal instabilities. A modified Newton-Raphson framework is designed for dealing with nonlinearities of the discretised system of equations. The performance of the numerical model is examined through a number of numerical examples. The state-of-the-art computational scheme developed is useful for simulation of geotechnical engineering problems involving unsaturated soils.     

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

顾及地类转换差异的城市空间扩展元胞自动机模型及应用研究

元胞自动机模型已经成为城市空间扩展模拟研究的重要方法之一,并得到广泛应用。然而,现有的城市扩展元胞自动机模型仍存在不足。由于元胞状态设置较为简单,从而使模型转换规则中对不同用地类型向城市用地转换的差异与强度考虑不够。基于此本文在元胞自动机模型的框架下,设计了多元结构的元胞状态及转换规则,提出了顾及地类转换差异与强度的城市扩展元胞自动机模型。在计算非城市用地向城市用地转换的转换概率时,该模型考虑了3个方面的概率：① 地形地貌、经济发展等城市发展的驱动因素对城市用地扩展的影响概率,该概率采用logistics方法进行计算;② 邻域元胞的用地类型对中心元胞转换概率的影响,该概率采用扩展摩尔型方法进行计算;③ 不同类型的非城市用地（本研究中包括耕地、林地和裸地3种类型）向城市用地转换的强度,该概率由模拟基期土地利用数据与目标年份土地利用数据的叠加,得出不同类型的非城市用地在此时间段内向城市用地转换的规模,进而确定不同类型的非城市用地向城市用地转换的强度。最后,将以上3种概率的乘积作为元胞转换的概率。通过转换概率与转换阈值的对比判断中心元胞是否在下一个阶段转换为城市用地。经过迭代计算,不断增加城市用地元胞的数量。当模拟城市用地的结果与目标年份的城市用地规模差值在一定的范围内时停止模拟,得出最终结果。模型构建完成后,本文以长株潭城市群核心区为例进行了模拟实验。以2001年该地区的土地利用数据为基期数据,模拟2010年该地区的城市用地规模和空间分布。研究结果表明,根据本文提出的模型模拟的城市扩展结果与真实数据相比具有较高的一致性。模拟结果正确率达到68.66%,比基于传统logistics回归的元胞自动机模型的模拟精度提高了4.25%,Kappa系数为0.675。该模型较好地模拟了长株潭城市群核心区城市扩展,在城市空间扩展模拟中具有较好的适应性与有效性。     

弧形海岸裂流的数值模拟研究

弧形海岸波浪产生的裂流严重危害人类活动，但是目前对其特征缺乏充分认识。本文对Haller物理模型实验和三亚大东海的数值模拟表明FUNWAVE模式具有较好的裂流模拟能力。基于该模式进行了多种弧形海岸条件的裂流数值模拟，给出裂流的一些特征：（1）海岸弯曲度增大，裂流增强；（2）海岸坡度对裂流有比较大的影响，太陡或太平缓的海岸不利于形成裂流；（3）海岸尺寸减小，裂流减弱；（4）波高和波周期增大，裂流增强，但是对于某些海岸而言，0.4m波高可能就存在危害比较大的裂流。     

Revisiting the existence of an effective stress for wet granular soils with micromechanics

A possible effective stress variable for wet granular materials is numerically investigated based on an adapted discrete element method (DEM) model for an ideal three‐phase system. The DEM simulations consider granular materials made of nearly monodisperse spherical particles, in the pendular regime with the pore fluid mixture consisting of distinct water menisci bridging particle pairs. The contact force‐related stress contribution to the total stresses is isolated and tested as the effective stress candidate for dense or loose systems. It is first recalled that this contact stress tensor is indeed an adequate effective stress that describes stress limit states of wet samples with the same Mohr‐Coulomb criterion associated with their dry counterparts. As for constitutive relationships, it is demonstrated that the contact stress tensor used in conjunction with dry constitutive relations does describe the strains of wet samples during an initial strain regime but not beyond. Outside this so‐called quasi‐static strain regime, whose extent is much greater for dense than loose materials, dramatic changes in the contact network prevent macroscale contact stress‐strain relationships to apply in the same manner to dry and unsaturated conditions. The presented numerical results also reveal unexpected constitutive bifurcations for the loose material, related to stick‐slip macrobehavior.     

沉积物中硬质粘土层的研究进展

大量的钻孔资料表明,平原地区及其海域沉积物中普遍有硬质粘土层的存在。硬质粘土层在工程地质、地理学研究等方面具有重要的价值,它不仅是高层建筑的持力层,而且是研究全球环境变化事件、古气候演变的良好载体。该文阐述了硬质粘土层的一般特征、成因以及在粒度、地球化学元素、年代学、沉积环境等方面的研究进展,并展望了硬质粘土层在年代、物质来源和沉积环境等方面的研究方向,认为黄河三角洲硬质粘土层研究较少,需要开展大范围的、系统深入的、多学科的宏观和微观综合分析,挖掘硬质粘土层蕴含的古环境意义和应用价值。     

杭州湾中部实测波浪特性分析

利用杭州湾中部一年实测波浪资料,分析该地区的波参数统计变化特性,采用最小二乘法拟合得出相关参数之间的关系式,并统计分析了频谱特性。结果表明:杭州湾中部以小浪和轻浪为主,在各月分布较为均匀,年平均周期为2.97 s;最大一次波浪过程为冷空气影响所致,影响强度大于台风莫拉克;常浪向分布在东北至东南向,其中又以小浪出现较多,对应的波周期以2~4 s为主;强浪向主要分布在西北和东北方向,对应的波周期主要分布在3~5 s;多数特征波参数之间相关关系较好;由谱分析得知风浪占多数,且以单峰为主。研究结果可为相关工程和理论研究提供基础资料。     

典型深街谷内树木空间配置对行人呼吸高度处气流的影响

为揭示树木的不同空间配植方案对行人呼吸高度气流的影响,本文将树木视为均匀多孔介质,通过附加源项法从空气动力学角度用CFD模拟了H/W=2的典型深街谷几何内4种树木配植情景,实验表明,不同空间配置下树木对街谷内行人呼吸高度处局地气流的影响强弱在空间分布模式上差异悬殊：① 均匀种植的树木对街谷内行人呼吸高度的气流起到阻碍作用,不均匀种植则有效提升街谷的整体流速。4种空间配植方案下树木对气流的影响程度不同,阻碍作用从大到小的顺序为均匀间距8 m（Spa8m）>均匀间距6 m（Spa6m）>均匀间距20 m（Spa20m）>不均匀配植（Non-uniform）;对应的平均气流增强指标顺序为$\bar{D}_{spa8}$（-19.31%）<$\bar{D}_{spa6}$（-16.14%）<$\bar{D}_{spa20}$（-10.73%）<$\bar{D}_{non-uniform}$（1.25%）。② 对比不均匀和均匀的种植方案,不均匀植树的街谷内部行人呼吸高度的气流流速比其对照案例（均匀植树Spa8m方案）整体增强了106.49%。街谷中部不种树,在街谷两端配置树木并预留足够的自由空间的不均匀植树方案,能够让角涡渗入街谷中部,促使街谷内部的垂直漩涡和两端的水平角涡运动,增强湍流和垂直交换,有效减少了街道两端“风口效应”和街道中部“风影效应”的区域,改善了整个街谷行人呼吸平面的风环境。④ 合理空间配置的树木能够改善街谷内部的行人风环境。街谷内行人呼吸高度处的气流对局地条件很敏感,树木的局部配置（空间簇集、密度）将引起强烈的空间变化。在既有城市建筑布局条件下,如何通过谨慎的景观设计,利用树木等城市绿化措施有效地改善城市的行人风环境,缓解污染扩散、疾病传播等问题,本文的方法可提供一定的参考。